What is the feeler arm on a Whirlpool ice maker?

The feeler arm is the metal wire that stops the icemaker when the ice-bin gets full. Sometimes this feeler arm will jump out of the hole on the back of the head of the icemaker so that it will lift up and back down when the icemaker cycles. If it is out of the hole, place it back and your problem should be fixed.Click to see full answer. In this manner, what is the feeler arm on the ice maker?The feeler arm is the wire arm that shuts the icemaker down then it hits the ice. There is a spring inside the icemaker head that will force the arm back down after the motor lifts it up. If this spring is broken the arm will not come back down to push the switch as if it were hitting ice, shutting the icemaker off.Also, how does the ice maker work on a Whirlpool refrigerator? The water filter should be replaced about every six months to maintain proper water flow and ensure water quality. The icemaker mold thermostat monitors the temperature of the ice mold (ice tray). Once the mold reaches the proper temperature, the icemaker ejects the ice cubes and refills the ice mold with water. Correspondingly, how do I reset my Whirlpool ice maker? Look for the Reset Button To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker, push this button in and hold it for 10 seconds.Should you turn off your ice maker?You may also want to turn off your ice maker if you are going to be away from home for a week or more. There is no need to keep making ice if you aren’t going to be using it while it is fresh before it absorbs odors and off-flavors.