Can I put crown molding on a textured ceiling?

Crown molding is a popular method of hiding the seam between the ceiling and the walls. It can also be used on popcorn ceilings. Don’t be intimidated if you have a popcorn-textured ceiling. Although it does take a bit of extra care, installing crown molding with a popcorn ceiling is much easier than you might imagine.Click to see full answer. In this regard, how do I fix the gap between crown molding and ceiling?A thin bead of caulk between crown molding and the ceiling can create a professional, finished appearance and hide any cracks or gaps. The caulk can be painted to match the ceiling or the molding so that it’s not even visible and the molding looks like it is flush with the ceiling.One may also ask, which side of crown molding goes against the ceiling? Crown molding can look good both ways: in its usual alignment or upside-down, which makes it difficult to determine the end that’s supposed to be the top. Generally, the end with the least amount of detail goes on top, and the decorative trim faces the bottom. Also asked, should you caulk crown molding? Gap by crown molding should be caulked. After crown molding is installed, it is caulked at the top and bottom, to hide the gap. Occasionally, this may need to be recaulked. If your current crown molding is white, you may not need to touch up the area with paint after the caulk is applied.Do you have to nail crown molding into studs? Crown Molding Most of the time there is no need to hit the vertical wall studs with the nails because the top 3 inches of the wall framing feature two horizontal ceiling plates, each 1-1/2 inches thick. If you’re attaching the molding below the top 3 inches of the wall, insert the nails in the wall studs.