Can you hook up car amp to home stereo?

Car stereos run on 12 volts DC electric current, but you can connect a car stereo to 110 volts AC and make it work inside your home.Click to see full answer. Besides, how do you hook up an amp to a home stereo?Usually, you’ll be installing a 4-channel amplifier with speaker-level inputs. The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal. Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.Subsequently, question is, can you hook a car amp up in your house? If you’ve got a car amplifier you’d like to use in your home, there’s one major obstacle to overcome: how to power the amplifier. Wall outlets provide 110-volt AC power, but amplifiers require 12-volt DC power. You’ll have to do a little extra wiring, but the problem is not insurmountable. Correspondingly, can you hook up a car subwoofer and amp to a home stereo? A subwoofer meant for a car stereo can often give you better sound quality on your home theater system. The problem is that this subwoofer requires an amplifier that runs on 12-volt power, like from a car battery. The subwoofer and amplifier would fry if either was plugged into a home power socket.How do you wire a car stereo to an outlet?You need a 12V power cord to use your car stereo power supply for home use, but you can easily get that from a hardware store. Cut the end of the power cord and connect the black wire with the line of white around the stereo’s red and yellow wires. Make sure every wire is completely covered before you plug it in.