Does gel stain work on fiberglass door?

Gel Stains Fiberglass doors do not accept added moisture, which is why they make great doors. Gel stains are very fickle and require great care to apply to fiberglass doors. The main trick to applying a gel stain is to follow the instructions precisely that are on the can.Click to see full answer. Herein, can you use gel stain on fiberglass door?Use a high quality, heavily pigmented, oil-based stain (recommended). Gel stains can also be used. Before starting, and occasionally throughout the project, stir the stain until the texture is creamy. The stain should be applied in the following order working on one small section of the door at a time. how do you finish a fiberglass exterior door? Staining Wipe the entire surface of the fiberglass door with a lint-free rag, such as a microfiber cloth, saturated in mineral spirits or acetone. Slowly stir the stain with a paint stirrer. Apply the stain with a foam brush. Likewise, how long does gel stain take to dry on fiberglass door? Flip the door over and clean it with mineral spirits, then apply the stain, working with the raised sections or panels first and finishing with the flat and recessed areas. Let this dry for at least six hours or longer, depending on the product directions, then apply a coat of clear urethane.What stain do you use on fiberglass doors?Remove all door hardware. Use a high quality, heavily pigmented, oil-based stain (recommended). Gel stains can also be used. Before starting, and occasionally throughout the project, stir the stain until the texture is creamy.