How do I get AC wire for my thermostat?
Start by removing the access panel on the furnace, and locating the thermostat wires. Remove the wire from the G terminal, and connect it to the C terminal. Using a short piece of 18 AWG wire, make a jumper and connect it between the Y and G terminals (this is only required if you have…
Start by removing the access panel on the furnace, and locating the thermostat wires. Remove the wire from the G terminal, and connect it to the C terminal. Using a short piece of 18 AWG wire, make a jumper and connect it between the Y and G terminals (this is only required if you have both heat and central air).Click to see full answer. Correspondingly, do I have AC wire for my thermostat?Thermostats can get this constant power through a common wire or “c-wire.” Simply remove your current thermostat face from its baseplate and look for the terminal labeled with the letter “c.” If this terminal has a wire attached to it, you have an active “c-wire.”Subsequently, question is, what color is the C wire for a thermostat? Here are common uses for wire colors: Blue or Black – C – Common wire, may be unused by your existing thermostat. Enables continuous power flow from the Red wire. Red – R – 24VAC power from the furnace’s transformer. Also Know, what if my thermostat has no AC wire? If your current thermostat didn’t need a C-wire, it (or a wire that can be used as a C-wire) might be rolled up inside the wall. This is more likely to be true if you see all the other color wires present. Line voltage thermsotat scenario: you have just two wires (white and red, probably), and they’re thick.Is RC and C wire the same?Typically, the wires that provide the power (often called the “hot” wires) are labeled Rc (cooling) and Rh (heating). They provide a source of 24V power coming from the HVAC control board. Other times they are the same wire. In that case it will typically be labeled Rh/c.
