How do I stop my kitchen cabinet doors from opening too far?

How To Stop Cabinet Doors From Opening Too Far In 60 Seconds Use a screw gun to take the cabinet door off the hinge. Take the restrictor clip and drop it into the cup of the hinge. Open up the hinge so that it clicks into place. Install the cabinet door back onto the cabinet. Repeat IF needed on any other cabinet doors. Click to see full answer. Accordingly, how do you stop a door from opening 90 degrees?Open the door to 90 degrees. If the wedge doesn’t stop the door from opening farther than 90 degrees, choose a thicker wedge. Depending on the style of door and hinge, you might need to slide the wedge slightly under the edge of the door to get it to work properly. Try different wedges until you get one that works.Likewise, why do cabinet doors stay open? Open the cabinet door and push it shut it again. If the cabinet door fails to close completely or fails to stay closed, the spring tension is too light. When the door is in the open position it will expose two screws on each hinge. These are slightly recessed into the body of the hinge. One may also ask, how do you stop a door from opening all the way? Place your hinge pin on a scrap piece of wood. Find the middle of the pin and tap it with your hammer until it has a slight bend. It only took three taps with my hammer. This bend will provide enough friction to stop the door from closing or opening by itself.How do you fix a cabinet door that rubs? How to Fix Everything For Dummies Open and close the door several times to determine where it’s rubbing. Using a pencil or chalk, mark the edge to show exactly where you have to work. Put the screwdriver under the hinge pins and tap the bottom with the hammer. Take out the pins and lift the door off the hinges.