How do I test a proximity switch?
Put a screw in front of the face of the sensor to test its operation. If the proximity sensor LED turns on and off, and the diagnostic bit changes status, then the sensor is working correctly. Align the trip flag so that it triggers the proximity sensor. Check the proximity sensor and extenstion cables for…
Put a screw in front of the face of the sensor to test its operation. If the proximity sensor LED turns on and off, and the diagnostic bit changes status, then the sensor is working correctly. Align the trip flag so that it triggers the proximity sensor. Check the proximity sensor and extenstion cables for damage.Click to see full answer. Similarly, it is asked, how do I know if my proximity sensor is working? Your device has a sensor that detects proximity. To test the proximity sensor From your Home screen, tap the Application screen icon. Find and tap Settings > About Phone > Diagnostics. Tap Test device > Ear proximity, and follow the on-screen instructions. Secondly, how does a proximity switch work? Proximity switches open or close an electrical circuit when they make contact with or come within a certain distance of an object. There are 4 basic types of proximity switches: infrared, acoustic, capacitive, and inductive. Infrared. These work by sending out beams of invisible infrared light. Also know, how do you check proximity? Procedure Open the Device Help or Moto Help app. Tap Fix or Device Diagnosis, or skip to. Tap Hardware Tests. Tap Proximity sensor. Perform test by holding your hand over the phone. Note: The displayed icon should change to a checkmark once your hand is close enough to the front-facing camera. How does a 3 wire proximity sensor work?A three-wire sensor has 3 wires present. Two power wires and one load wire. The power wires will connect to a power supply and the remaining wire to some type of load. The load is a device that is being controlled by the sensor.
