How do I tighten the handle on my Kohler bathroom sink?

Single-Handled Faucet Tighten the Allen screw located on the underside of the handle to prevent rocking. Turn the water supply valves to the “Off” position to shut off the water supply to the faucet. Remove the Allen screw from the underside of the handle using an Allen wrench, and pull the handle up and off. Click to see full answer. Just so, how do you tighten a Kohler bathroom faucet handle? Tighten the Handle Turn off the water supply. Rotate the handle to the “ON” position. Using a 3/32″ or 2.5 mm hex wrench, tighten the handle setscrew by turning it clockwise. The handle should now be seated more firmly on the faucet.Likewise, how do you fix a loose head on a tap? -Tap Back Nut Box Spanner – 27mm & 32mm. Put a towel under as there will be water left in the system. Slowly undo the flex pipes nuts. Step 3: Use the Tap Back Nut Box Spanner – 27mm & 32mm to tighten back the tap nut making sure you hold the tap in the same time. Beside this, how do you tighten a single handle bathroom faucet? Remove the plate that covers the screw holding the lever in place. On most single lever faucets, you can pop out this small plate with a thin-bladed knife. Tighten the screw holding the lever. Wrap the valve stem with plumber’s tape. Things You Will Need. Tip. Warning. References (1) About the Author. How do you remove the handle on a Kohler bathroom faucet? Remove the Handles for the Finial Bathroom or Kitchen Faucet Hold on to the handle while turning the handle base counterclockwise by hand or with a strap wrench, taking care to protect the finish. Remove any remaining components to expose the valve. Set all parts aside for re-use. The valve can now be replaced or other repairs made. Reassemble handle parts in reverse order.