How do I troubleshoot my Whirlpool ice maker?

Fix: Start by making sure all electrical connections are properly seated. Slide the refrigerator out from the wall, turn off the water supply valve and disconnect it from power. Locate the quick release plug on the back wall inside the freezer. Unplug the connection it and reconnect it to ensure it’s fully connected.Click to see full answer. Also know, how do I reset my Whirlpool ice maker?To access it, you must first remove the ice tray. Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker, push this button in and hold it for 10 seconds.Additionally, why isn’t my icemaker working? If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it. Also to know is, why is my Whirlpool ice maker not making ice? If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Before replacing the ice maker assembly, check the water inlet valve, water line, and fan.How do you troubleshoot an ice maker? Ice Maker Troubleshooting Guide Check the shutoff arm. Check the supply valve. Inspect the water supply line. Test the shutoff switch. Check the freezer temperature. Inspect the ejector gear. Test the ejector motor. Test the ice mold heater.