How do I turn off child lock on LG Inverter Direct Drive?
To TURN OFF CHILD LOCK on your LG washer, press and hold the CHILD LOCK button for 3 to 5 seconds. The washer should now have CHILD LOCK mode DISABLED and all buttons will function properly. NOTE: ON other newer LG front load washing machines hold the PREWASH/CHILD LOCK button for 3 to 5 seconds…
To TURN OFF CHILD LOCK on your LG washer, press and hold the CHILD LOCK button for 3 to 5 seconds. The washer should now have CHILD LOCK mode DISABLED and all buttons will function properly. NOTE: ON other newer LG front load washing machines hold the PREWASH/CHILD LOCK button for 3 to 5 seconds to turn CHILD LOCK OFF.Click to see full answer. Similarly, it is asked, where is the child lock button on LG washer?”On nearly every model, there is a Child Lock button on the control panel display. users should turn on the machine and then press and hold the Child Lock button for 5 seconds to activate it. Once activated, the machines cannot be used and a ‘CL’ (Child Lock) code will display.”Beside above, how do I reset my washing machine? To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components. Also to know is, how do I reset my LG automatic washing machine? How to reset the washing machine: Press POWER to turn the washer off. Unplug the washer from the power outlet or turn the circuit breaker to the unit off. With the power disabled, press and hold the START/PAUSE button for 5 seconds. Plug the washer back in, or turn the circuit breaker back on. Is there a reset button on my LG washer?To reset this issue, the manufacturer advises to unplug the machine, press the Start-Pause button, and hold it in for 5 seconds before restoring power by plugging it into the outlet. Check for code clearance by completing a Run-Rinse cycle. Overloading specific gentle cycles can cause the error code to appears as well.
