How do I wire a GE Smart Switch?

Connect all NEUTRAL wires from the wall to the white NEUTRAL wire on the C by GE Smart Switch. Connect the LOAD wire from the wall to the red LOAD wire on the C by GE Smart Switch. Connect the GROUND wire from the wall to the green GROUND wire on the C by GE Smart Switch. Cap the second TRAVELER wire from the wall.Click to see full answer. Similarly, how do I make my GE Smart Switch ring?Connecting a Z-Wave sensor to your Ring Alarm is much like adding any of Ring’s own sensors. Click the large “+” symbol to “Set up a device” on the Ring app home screen and choose “Security Devices.” From there, choose the type of device. In this example, I’m adding a GE Door Hinge sensor, so I’ll click “Sensors.”Additionally, how do I reset my Smart Switch? To reset a smart switch using the Factory Default button: Locate the recessed button that is marked Factory Default or Factory Defaults on the back or bottom panel of your device. Insert a straightened paper clip or a similar device into the hole of the Factory Default button and hold for two to three seconds. Likewise, people ask, how do you reset a smart light switch? Press to reboot the Smart Switch. Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. Press and hold (about 10 seconds) until the Wi-Fi status LED blinks green rapidly to factory reset the Smart Switch.How does GE smart switch work?Smart Switch works with The Google Assistant, Amazon Alexa or Apple Homekit to allow out-of-home and voice control right out of the box—with no hub required.