How do you adjust the ice maker on a GE Profile refrigerator?
VIDEOClick to see full answer. Correspondingly, how do you adjust a GE ice maker?Turn the small adjustment set screw on the upper, middle right hand side of your ice maker a half of a turn with a Phillips or flat head screwdriver, depending on the screw your ice maker has. Turning the screw clockwise will…
VIDEOClick to see full answer. Correspondingly, how do you adjust a GE ice maker?Turn the small adjustment set screw on the upper, middle right hand side of your ice maker a half of a turn with a Phillips or flat head screwdriver, depending on the screw your ice maker has. Turning the screw clockwise will decrease the water level and turning it counterclockwise will increase the water level.Subsequently, question is, what is the feeler arm on the ice maker? The feeler arm is the wire arm that shuts the icemaker down then it hits the ice. There is a spring inside the icemaker head that will force the arm back down after the motor lifts it up. If this spring is broken the arm will not come back down to push the switch as if it were hitting ice, shutting the icemaker off. Also question is, how do I reset my GE ice maker? How to Reset the Ice Maker on a GE Side by Side Refrigerator Locate the shut-off switch on the front of the GE refrigerator ice maker and turn the switch off, leaving it off for at least 30 seconds. Turn the switch back on and locate the feeler arm on the ice maker. Push the feeler arm up three times quickly to reset the ice maker. Why won’t my GE refrigerator make ice?If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace the water inlet valve.
