How do you apply wet look sealer to concrete?

Your surfaces must be properly cleaned and prepped before beginning. After the surface has been cleaned and prepped, apply a thin coat of BEHR PREMIUM® Wet-Look Sealer with either a nylon-polyester brush, 1/4″- 3/8″ nap roller cover, high quality pad applicator, or a high quality pump sprayer with an adjustable tip.Click to see full answer. Regarding this, can you apply sealer to wet concrete?“You don’t want to seal wet concrete.” Applying sealer to wet concrete will cause problems, adds Sacco, as the sealer can fog up. Sacco also suggests that once the concrete is completely dry, avoid applying the sealer during the heat of the day. how long does it take for sealant to dry on concrete? 1-3 hours Subsequently, question is, how do you apply concrete sealer? How to Apply Concrete Sealer Remove all oil, grease, stains, dirt, and dust from the concrete. Strip any existing sealer from the surface. Open up the concrete with an etching solution. Apply a thin coat of sealer using a roller or sprayer. Wait for the first layer of sealer to dry. Apply a second coat in the opposite direction. Does power washing remove concrete sealer?A water-based sealer can be removed using chemical etching, pressure washing or by mechanical cutting. After it has dried you can apply the water-based sealant. Keep in mind, if your concrete was stained or dyed using Xylene, it can damage or change the color of the concrete.