How do you attach a basketball hoop to a garage roof?

Center a ladder in the middle of your garage, home or shed wall and locate the roof studs in the center of the roof with an electronic stud finder. Center the basketball hoop’s mounting bracket over the two studs with the front edge of the bracket flush with the front of the roof. Click to see full answer. Similarly, how do you attach a basketball hoop to a garage?The regulation height — measured from the court surface to the top of the rim — is 10 feet. Use a ladder to get the mounting bracket to the desired location. Attach the bracket to the garage per the hoop kit instructions. Attach the backboard and rim to the mounting bracket, following the kit instructions.Furthermore, how high do you put a basketball hoop? The top of the hoop is 10 feet (305 cm) above the ground. Regulation backboards are 72 inches (183 cm) wide by 42 inches (110 cm) tall. All basketball rims (hoops) are 18 inches (46 cm) in diameter. Accordingly, how do you attach a basketball hoop to the wall? There will be pre-drilled holes in the backboard for where to place the hoop. Use screws and a drill to attach the hoop. Attach the backboard to the mounting bracket or the wall. If you are using a mounting bracket, attach the board using bolts, nuts and washers.How do you attach a backboard to a garage?Attach the backboard, preferably with the help of a friend, using a series of nuts and bolts. Seal any holes or opening with a water resistance caulk to prevent the bolts from rusting. Once the backboard is secure, check it with the level for straightness and adjust as needed. Attach the net securely to the rim.