How do you attach a nail fin to a window?

Screw the nail fin strip to the side of the window using a cordless screw gun and 3/8-inch self-tapping ceramic coated screws. Space the screws 4 inches apart, centered along the length of the strip. The screws will penetrate through the strip by themselves with no pilot hole. Do both sides of the window.Click to…

Screw the nail fin strip to the side of the window using a cordless screw gun and 3/8-inch self-tapping ceramic coated screws. Space the screws 4 inches apart, centered along the length of the strip. The screws will penetrate through the strip by themselves with no pilot hole. Do both sides of the window.Click to see full answer. People also ask, what is a nailing fin on a window?A nail (or nailing) fin is a thin piece of metal extending from the window itself that goes all the way around the perimeter of the window frame. This piece adds to the window’s permanence and is nailed directly to the house’s frame (studs), hidden between the interior and exterior of your home.Beside above, do replacement windows have nailing flange? When installing a “new construction window”, the entire window unit including sash and frame is removed down to the rough opening and the complete assembly is replaced which includes a nailing flange which has to be secured to the exterior wall. Also, should you nail the top flange of a window? Some windows have a nailing flange that is an integral part of the window (usually vinyl windows), but this window does not. Run the flashing tape at the top at least six inches past the window on each side.Do you nail the bottom flange of a window?Nail the bottom flange only. Make sure the windowsill is level, then nail the bottom flange every 8 in. Then hold the window in place by nailing just the two corners of the top flange from the outside.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *