How do you attach wooden stairs to concrete?

How to Anchor Deck Stairs to Concrete Use your jigsaw. Notch out the bottom front of the center stair stringers to accept a 2×4 base plate. Make sure your stringers are level. Fasten the base plate to the stair stringers with screws. Locked in place. Use a hammer and drill to install 1/2″ x 3″ sleeve anchors through the base plate into the concrete pad. Click to see full answer. Similarly, can you put wood over concrete steps?The layer of wood you place over the top of the concrete steps can also make them stronger. You must use a hardwood (like pine), though, or you will soon see plenty of wear and tear on the new steps. Covering your concrete steps with wood can add protection and beauty to your steps.Additionally, how do you cover concrete with wood? How to Cover a Concrete Porch With Wood Cut enough boards of 1-by-4 treated lumber to run a row every 16 inches from the house to the front edge of the porch across the entire width. Attach the two outside battens to the porch, using tapcon-style anchors. Similarly one may ask, how do you attach stairs to a deck? Cut stair treads so that they overlap the stringers by about 1″ on both sides. If the stair width is 36”, cut treads 38”. Push one tread against the back of the stringer, center, and fasten with two 3” galvanized deck screws per side. Leave 1/4” between the first and second tread board and attach with deck screws.How do you attach wood to concrete without drilling?Here is a very easy method for attaching that wood to concrete without using all those concrete anchors. You will need a hammer drill, 20 ounce hammer and some 16d nails. Insert a 1/4″ masonry drill bit, 4 or 6 inches long, into the hammer drill. Drill through the wood and into the concrete.