How do you build hills with pavers?

Have patience and you will soon have a beautiful set of paver steps. Plan the outline of the steps. Dig a sloped trench leading from the top of the hill down to the bottom. Measure the distance between each step. Mix the cement to a consistency of thick mud. Click to see full answer. Consequently, how do you build paver steps on a hill? Adding pavers to a hillside is rather difficult. Plan the outline of the steps. Dig a sloped trench leading from the top of the hill down to the bottom. Measure the distance between each step. Mix the cement to a consistency of thick mud. Install another ¼ inch thick layer of cement over the top of the stairs. Furthermore, how do you build a patio on a sloped yard? Use a spade and shovel to excavate six inches into the soil. Begin digging out the soil at the lowest part of the slope. You will need to dig more soil from the highest part of the slope so that the entire area will be level. Use a level to ensure that the area is flat and even. Likewise, can you install pavers on a slope? Few lawns provide a completely level place for you to install a patio or walkway made out of landscape pavers. Some slope is desirable, because it allows for drainage. You don’t want adjoining pavers to be uneven or they become trip hazards. Dig a trench 8 to 10 inches deep where you plan to build the patio or walkway.How do you make rock steps on a hill?Dig out a space at the bottom of the hill for the first step, using the two string lines as a guide for the width. Use a sod cutter to cut straight down into the hillside and a flat shovel to cut horizontally into the hill. You must cut down as deep as the height of the rock.