How do you change the battery in a vivint lock?

You will need four AA batteries to change the batteries in your door lock. Before you change the batteries, be sure that your system is disarmed and that the door is unlocked. From the inside part of your door, slide the cover up and off of your door lock. Grip the battery pack from the top and pull it up and out.Click to see full answer. Herein, how do I take the lock off my vivint? Smart Lock (9910) – Rehand Slide the back plate up off of the back of the deadbolt. Remove the battery pack. Wait for 10 seconds. Press and hold the Lock button on the deadbolt keypad. Replace the battery pack. There will be a loud beep. Release the Lock button once the deadbolt motor starts to initiate. Beside above, do keyless door locks have batteries? Replacing the Battery in Your Keyless Lock The battery compartment is typically contained within the inside cover of the lock, so you’ll need to remove this cover with the screwdriver. Many locks utilize a 9 volt alkaline battery, but other locks such as the Trilogy PDL7100 use four C batteries instead. Hereof, how do you open a Schlage Lock with a dead battery? Touch a new high-quality alkaline 9-volt battery to the contacts below the bolt throw. Wait for 1 red light and then 3 green lights with 3 beeps. Present a valid credential. Rotate the bolt throw away from the door edge. Replace the batteries. How do I change my vivint door lock code? SkyControl 3.0 – Change Door Lock Code At the home screen, tap the menu icon in the lower right. Tap Users. Enter your 4-digit PIN. Select the user you want to edit. Make sure their Separate lock PIN option is toggled on. Select Lock PIN to add or edit their door lock code. Under Lock Access, select the door lock(s) you want the user to have access to.