How do you change the blade on a Craftsman 10 inch miter saw?
Changing a blade on this saw is basic and easy to understand. Unplug the saw from the power outlet. Turn a large wing nut counterclockwise, on the right side of the saw blade housing on top. Place the wrench on the arbor bolt located at the center of the blade. Click to see full answer….
Changing a blade on this saw is basic and easy to understand. Unplug the saw from the power outlet. Turn a large wing nut counterclockwise, on the right side of the saw blade housing on top. Place the wrench on the arbor bolt located at the center of the blade. Click to see full answer. Keeping this in consideration, how do you change the blade on a Craftsman 10 inch compound miter saw? How to Change a Blade on a Craftsman Miter Saw Turn off the saw by flipping the switch to the off position. Grab the arm and lock it into the highest position to allow for maximum workspace to remove the blade. Detach or loosen the guard so it is out of the way of the blade. Remove the lock the blade is attached to by using a 3/8 inch wrench. Secondly, how do you raise the blade on a Craftsman miter saw? To lock and unlock the pin, the blade must be in the farthest down position. The pin will not unlock, even though the saw is down. You must push the saw down as far as it will go, then pull the pin out to release the blade. Additionally, how do I change the blade on a miter saw? How to Change Blade on Miter Saw Remove the Spindle Cover. Rotate the blade guard to the top position. Remove the Blade. Press the spindle lock to fully lock the spindle. Replace the Blade. Replacing the blade is opposite of removing the blade. How do I fix the laser on my Craftsman miter saw? Video of the Day Mark a straight line across a piece of scrap wood with a pencil. Place the wood on the miter saw table beneath the saw blade. Lower the handle of the miter saw until the blade is to the left side of the line. Turn on the laser on the saw handle. Loosen the screw 1/8 turn with a Phillips screwdriver.
