How do you change the rear wiper blade on a Hyundai Santa Fe?

The rubber wiper blade should be pointing away from the SUV and to the right (passenger) side of the vehicle. Snap the mounting bar in to the socket. Continue rotating the new wiper blade until it is parallel with the wiper arm. Gently lower the wiper arm down to the back window.Click to see full answer. People also ask, how do you change the rear wiper blade on a 2007 Hyundai Santa Fe? Release the old blade. Lift the wiper arm off the window. Remove the wiper. Once rotated, the wiper will release from the wiper arm with a gentle click. Position the new blade. Place the small bar attachment on the new wiper blade into the hook on the wiper arm. Lock the blade into place. Done! Also, how do you change wiper blades on a 2016 Hyundai Santa Fe? Start on the driver’s side of your Santa Fe. Most blades are held in place with a tiny clip. Push that clip up towards the arm and push the blade backwards, as if you were sliding it down the wiper arm. Also to know is, how do you fix a rear windshield wiper? How to Replace a Rear Windshield Wiper Lift the wiper arm away from the rear window until it locks in an outward position. Remove the blade by turning it at a right angle to the wiper blade arm. Slide the new blade into the wiper arm, making sure that it properly locks into place. Return the wiper arm carefully to the rear window. How do you change the rear wiper blade on a Hyundai Tucson?Pop the mounting bar into the “C” shaped socket at the end of the wiper arm. Rotate the new wiper blade until it is parallel with the wiper arm. Double check that the new wiper blade is securely attached to the wiper arm. Gently lower the wiper blade and arm back down to the back window.