How do you check the pressure switch on a Whirlpool Duet washer?

How to Test the Pressure Switch on a Whirlpool Duet Unplug the Whirlpool Duet washer power cord from the wall outlet. Go behind the Duet and remove the three screws securing the top panel to the rear panel with a Phillips-head screwdriver. Locate the pressure switch inside the washer cabinet. Adjust the scale on your ohmmeter to the RX1 or X1 scale. Click to see full answer. Similarly one may ask, how do I reset my Whirlpool Duet washer?Unplug the washer for 30 seconds to attempt to reset the Duet washer control. You can manually unlock the washer by removing the top (remove screws on the back of the top panel and slide the top panel back to lift off.Beside above, where is the water level sensor on a washing machine? The water level switch is found in different places on different machines—in many cases, it’s inside the control console. You can distinguish the water level switch from other round switches inside the washer cabinet by its rubber tube that runs from the switch down the side of the tub. Regarding this, what does a pressure switch do in a washing machine? A washing machine’s Pressure Switch detects when the washer’s water level reaches the correct setting. It does so by measuring the air pressure inside of a small tube connected to it. When a washing machine fills up with water, it needs a way to know when it’s full.How do you fix the sensor on a washing machine? Step 1 Water Level Sensor Unplug the washing machine! Using a 5/16″ socket wrench or an adjustable wrench, remove the three screws from the top rear of the washer. Lifting from the rear, remove the top panel. The top panel will still be connected by wires and hoses.