How do you check the transmission fluid on a 2001 Isuzu Trooper?
How to Check Transmission Fluid in an Isuzu Trooper Start the engine and wait for the Trooper to reach normal operating temperature. Pull the transmission dip stick from the engine. Wipe off the dip stick with a rag and put it back into the transmission filler neck until it bottoms out. Pull the transmission dip…
How to Check Transmission Fluid in an Isuzu Trooper Start the engine and wait for the Trooper to reach normal operating temperature. Pull the transmission dip stick from the engine. Wipe off the dip stick with a rag and put it back into the transmission filler neck until it bottoms out. Pull the transmission dip stick out once more and check the oil level. Click to see full answer. Similarly one may ask, how do you check the transmission fluid on a 2001 Honda Passport?Under the vehicle on the passenger side, the transmission has two plugs. The lower one is the drain plug and the upper one is the fill plug. To check the level, stick your finger in the upper hole and the fluid should be right at the edge of the bottom of the opening, with the engine running and in park position.Similarly, how do you fill a Isuzu Rodeo transmission? Fill the transmission with the engine running until fluid runs out the recessed fill hole. Remove the plastic hose. Reinsert and tighten the fill plug. If the Isuzu Rodeo has an automatic transmission, you will check the transmission fluid level with the dipstick. In respect to this, what kind of transmission fluid does a 2001 Isuzu Rodeo take? ACDelco ATF Type III (H) is a premium quality automatic transmission fluid for use in a variety of passenger cars and light trucks. It is Isuzu Rodeo 2001, Professional™ Full Synthetic Dexron™ VI Automatic Transmission Fluid by ACDelco®.How do you change the transmission fluid on a 2001 Isuzu Rodeo? How to Add Transmission Fluid to a 2001 Isuzu Rodeo Drive the 2001 Isuzu Rodeo around for a while to heat up the transmission fluid. Crawl under the Rodeo on the driver side and locate the transmission pan. Slide the plastic hose inside the recessed hole that the fill plug came out of. Turn off the engine. Crank the engine and let it idle.
