How do you clean white braided cable?

first off do not try pulling he dust off as it will rip off some of the braiding with it. just get a fairly damp, or moist cloth and wipe it a couple time, apply a firm pressure and its clean. don’t use a microfiber cloth , its not rough enough, or tissue, the tissue rips off and it gets all messy.Click to see full answer. Just so, how do you clean a white cable?Just use a little bit of hand sanitizer and keep applying it over the length of the cable over and over again. It has left my earphone cables looking almost new. Nail paint remover is quite effective. Take a few drops on cotton ball, you can remove any color from headphones/charger- volatile or non volatile. how do you get stains out of white headphones? 1) How to Clean Earphones Hold your earphones with the mesh side facing downwards. Using a bent paperclip and some blu-tack, go over the wire mesh and remove the remaining dirt and dust. Dampen a small cloth with rubbing alcohol or hand sanitizer and do a quick wipe over the metal mesh as well as the wires. In this way, how do you clean fabric cables? Canned air will work, but the whole cable will use almost an entire can. Or you use a microfiber cloth to wipe it down at first, then a damp one to help clean it up. You can even use a hand vacuum on a VERY low setting if you want.How do you clean dirty earbuds? Earbuds Start by gently dry brushing the wax out of the earbud. Hold them with the mesh facing down so that any debris can fall down as opposed to back into the earbud. Once that’s done, if you still see a waxy build up, dip a cotton swab in rubbing alcohol, tap it off and then wipe the bud to remove anything remaining.