How do you demodulate an FM waveform?

A simple and effective FM demodulation technique involves a high-pass filter (for FM-to-AM conversion) followed by an AM demodulator. A high-pass-filter-based FM demodulator is preceded by a limiter to prevent amplitude variations from contributing error to the demodulated signal.Click to see full answer. Furthermore, what do FM receivers use to demodulate signals? Quadrature Detectors The quadrature detector is probably the single most widely used FM demodulator. It uses a phase-shift circuit to produce a phase shift of 90° at the unmodulated carrier frequency. This detector is primarily used in TV demodulation and is used in some FM radio stations.One may also ask, what is frequency deviation in FM? Frequency deviation ( ) is used in FM radio to describe the maximum difference between an FM modulated frequency and the nominal carrier frequency. The term is sometimes mistakenly used as synonymous with frequency drift, which is an unintended offset of an oscillator from its nominal frequency. Also to know is, how a PLL is used as an FM demodulator? Demodulation of frequency modulation (FM): If PLL is locked to a FM signal, the VCO tracks the instantaneous frequency of the input signal. The filtered error voltage which controls the VCO and maintains lock with the input signal is demodulated FM output.How does an FM ratio detector work?The RATIO DETECTOR uses a double-tuned transformer to convert the instantaneous frequency variations of the fm input signal to instantaneous amplitude variations. These amplitude variations are then rectified to provide a dc output voltage which varies in amplitude and polarity with the input signal frequency.