How do you fix a starter on a riding lawn mower?

Instructions Disconnect the battery. Let the engine cool. Remove the engine blower housing. Lift the tractor hood. Remove the old starter motor. Remove the lower dash fastener and pull off the lower dash. Install the new starter motor. Reinstall the engine blower housing. Reconnect the battery. Click to see full answer. Also know, how does a starter work on riding lawn mower?An engine, whether on a lawn mower or an automobile, needs a significant amount of power to start. The battery provides the engine’s starter with power to engage the flywheel. The flywheel then turns the crankshaft to start the engine in motion. The starter solenoid is needed to engage the starter motor.Furthermore, how do you test a lawn tractor starter? Connect one end of a jumper wire from the battery’s positive terminal, and touch the small lug on the engine starter solenoid that is marked S with the other end to test the starter ignition switch. If the engine starter motor turns over or runs then the starter ignition switch is faulty and requires replacement. Beside this, how do I know if my starter is bad on my lawn mower? A riding lawn mower that has a bad starter can be difficult to diagnose. A bad starter can manifest itself in a cranking noise without engine turnover, a clicking when the ignition button is pressed, or a mower that simply does not respond to attempts to start.Why does my riding mower clicks when I try to start it?If the riding mower makes a heavy clicking or a rapid clattering sound when the key is turned to the start position, there is a problem with the battery or a part of the starting circuit. The clicking noise comes from a part called the starter solenoid. Low battery voltage – Battery needs charging or replacement.