How do you fix deep gouges in gelcoat?
Begin by sanding around the area and the scratch with 320-grit paper. Again, be cautious not to remove too much material. After sanding, use a Dremel tool to clean out the gouge a bit, then feather the edges of the scratch with 180-grit. This helps the gelcoat blend in and helps hide the edges of…
Begin by sanding around the area and the scratch with 320-grit paper. Again, be cautious not to remove too much material. After sanding, use a Dremel tool to clean out the gouge a bit, then feather the edges of the scratch with 180-grit. This helps the gelcoat blend in and helps hide the edges of the filled scratch.Click to see full answer. In this regard, how do you fix deep scratches in gelcoat?Once the gelcoat has fully cured, sand the repair smooth (wet sanding works particularly well with gelcoat). You can start with 220-grit sandpaper and, for a really slick surface, finish with at least 400- or 600-grit. Finally, apply a coat of high-quality marine polish and your repair is complete.Furthermore, how much does gel coat repair cost? Cost of fiberglass and gelcoat repair can vary depending on the level of damage on the surface. The usual repair cost can vary from $75 to $110, per hour. This includes the material costs and labor charges as well. Chips and gouges can take a few hours to repair. Considering this, how do you repair a deep gouge in a fiberglass boat? Fill any deep gouges and spend your time sanding out scratches while the filler sets up. Apply gel coat to the filled gouges and finish to the scratches and then final-sand the filled gouges. Buff all the repaired areas and then the rest of the boat. Apply any graphics to finish up.How do you repair deep scratches in fiberglass?Start by removing the wax and grease from the area with acetone. Wet sand the area with 1000 grit wet/dry sandpaper. Use a pail of water and gently rub the area with wet sandpaper. Frequently re-wet the paper to remove the gel-coat dust (paste) from the work area.
