How do you get a smooth finish on hardwood floors?
To get a good smooth shiny finish, you need to clean, clean and then clean again. Using finer and finer sand paper as you go before the finish is important. Once it is sanded, then tack cloth clean and apply the first stain coat. Once dry, a light sanding again then clean and tack cloth.Click…
To get a good smooth shiny finish, you need to clean, clean and then clean again. Using finer and finer sand paper as you go before the finish is important. Once it is sanded, then tack cloth clean and apply the first stain coat. Once dry, a light sanding again then clean and tack cloth.Click to see full answer. In respect to this, how do you smooth out hardwood floors?To get a good smooth shiny finish, you need to clean, clean and then clean again. Using finer and finer sand paper as you go before the finish is important. Once it is sanded, then tack cloth clean and apply the first stain coat. Once dry, a light sanding again then clean and tack cloth.Similarly, what can you put on wood to make it smooth? Get some oil-based urethane (I prefer a satin sheen) and a natural bristle brush and smooth the bare wood parallel with the grain using a progression of sandpapers up to 220-grit. Moisten the surface with a wet rag to raise the wood grain, then let dry for 2 days. Also asked, which finish is best on hardwood floor? Water-Based Polyurethane. Best for: Floors in need of a clear finish that dries quickly. Oil-Based Polyurethane. Best for: High-traffic areas. Moisture-Cure Urethane. Wax. Shellac. Penetrating Oil Sealer. Acid-Cured Finish. Aluminum Oxide. Why is my polyurethane rough?If you put polyurethane on a rough surface you will get a rough finish. Second, as @keshlam says, make sure there is no dust at all on the surface before you apply the finish. A slightly damp cloth can help pick up anything remaining (but make sure the wood is dry before you apply).
