How do you install a magnetic door catch?
First, mark the spot in the cabinet where you will install the catch. Place the magnetic side of the cabinet catch in the center of the marks, whether the catch is attached opposite the upper or lower hinge. Now place the non-magnetic side of the cabinet catch at the center of the spot you made….
First, mark the spot in the cabinet where you will install the catch. Place the magnetic side of the cabinet catch in the center of the marks, whether the catch is attached opposite the upper or lower hinge. Now place the non-magnetic side of the cabinet catch at the center of the spot you made. Click to see full answer. Also to know is, how do you install a magnetic catch? Place the magnetic base on the lower cabinet shelf. Drill pilot holes at the pencil marks. Screw the magnetic base to the shelf with a screwdriver. Place the striker against the inside of the cabinet door, and position it so it is directly across from the magnet when the door is closed. Furthermore, what is a magnetic latch? Neodymium Latch Magnets. These powerful magnetic assemblies are designed to be used as door latches for cabinets, chests, displays and more. Simply attach the magnet in a steel cup to one surface and the strike plate to the other to make a secure closure. Counterbore a hole in the wood for flush mounting. Also to know, how do magnetic door catches work? Using magnetic catches gives easy access to the pipe work without the hassle of fitting hinges to the door. The panel is simply pulled from the bottom and it comes off in one piece allowing full access to the work behind without being encumbered by a door which cannot be fully opened.How does a door catch work?The door catch is a fitting to keep a closed door at a normal position and not to naturally open due to a wind pressure. A ball type, a roller type, a magnet type, a slide catch to slide and stop as at a window, and a door holder type to hold the door of a specially equipped vehicle or light van are available.
