How do you install touch latch?

Place the touch latch on the cabinet floor or shelf away from the door hinges, with the latch extending beyond the edge of the floor or shelf. Close the door gently, pushing the touch latch inward. Open the door and, where the touch latch rests outline the elongated mounting holes with a sharp pencil.Click to see full answer. Also question is, how does a touch latch work?The Tip-On latch will push the door open wider than most other touch type latches (approximately 1.5″). This allows your hand to reach behind the door and pull it open. To close the cabinet door, simply push the door closed. Your existing self-closing hinge will keep the door closed against the cabinet frame.Also Know, what is touch latch? Overview. This touch latch is invisible from the outside of the door. When you use a touch latch no other hardware (knob, pull, latch) is needed on your door giving it a clean look. Available in either a regular duty or heavy duty model. The heavy duty model is slightly larger and has much stronger spring action. how does push to open work? The point of a handle is to be able to open and close a cupboard door, and push to open latches do just that, but better! This enables the user to simply push the door lightly and the door pops open, then push the door back into place and the magnetic push catch holds it closed.How do you install a magnetic push latch? Place the magnetic base on the lower cabinet shelf. Drill pilot holes at the pencil marks. Screw the magnetic base to the shelf with a screwdriver. Place the striker against the inside of the cabinet door, and position it so it is directly across from the magnet when the door is closed.