How do you light a pilot on a wall furnace?

Once the gas has had time to dissipate, turn the knob to “Pilot.” Then, hold down the “Reset” button and bring the flame of a long lighter close to the pilot light opening. This should light the furnace pilot light. Once you are sure the pilot light is on, release your pressure on the reset button.Click to see full answer. Subsequently, one may also ask, how do you light a pilot light on a wall furnace? Steps For Safely Lighting a Gas Wall Heater Have a match or long lighter available to light the pilot. Find the valve located in the heater and turn it to “Pilot”. Press inward on the valve. You should hear a hissing sound coming from the valve. Release the valve and light your match. Release the valve after one minute. Furthermore, how do you know if your furnace pilot light is out? How to Know If Your Pilot Light Is Out Locate the burner chamber door for the furnace or water heater. Inspect the burner chamber and locate the pilot light tube. Light the pilot light following the instructions printed on the label attached to the outer surface of the appliance. In this regard, where is the pilot light on a furnace? Go to the furnace and find the pilot valve. The pilot valve body is a box-shaped device into which the main gas line will run; it is located near the gas burners. It will usually have a gas cock or valve knob that reads ON, PILOT, and OFF. Locate this gas cock or knob.How do I turn on my gas wall heater? How to Turn On a Wall Heater To turn on your gas heater, locate the knob for starting. Turn the knob to “Pilot,” and then push down on the “Ignite” button. Once the pilot light comes on, hold down the Ignite button for 10 to 15 seconds. Set the temperature on the wall heater to your desired heating level.