How do you measure a rail and stile door?
To determine the length of your rails you need to know the profile width of your rail and stile router bit set. For most Infinity rail and stile router bit sets, the width of the profile is 7/16″. Now, subtract the overall width of the finished door and subtract the width of both stiles, 4-1/2″…
To determine the length of your rails you need to know the profile width of your rail and stile router bit set. For most Infinity rail and stile router bit sets, the width of the profile is 7/16″. Now, subtract the overall width of the finished door and subtract the width of both stiles, 4-1/2″ (2-1/4″ x 2).Click to see full answer. Simply so, how do you measure stiles and rails?The rails and stiles are often the same width for an even border around the door. The length of the stiles will be equal to the height of the door. The width of the rails is equal to the width of the door, minus the width of 2 stiles, plus the depth of the panel groove / connection joint on each stile.Also Know, which is the rail and which is the Stile? The vertical members of the frame are called stiles while the horizontal members are known as rails. In respect to this, how wide should rails and stiles be? Raised or inset-panel doors have stiles and rails, both typically measuring 2 to 2-1/2 inches in width. Stiles and rails for doors almost always measure equally in width except when the top rail is arched — which can add another 2 inches to the top rail, making it 3 or 4 inches wide on both sides of the arch.What is stile width?Stiles are the vertical pieces of the door. Particularly, stile width is important for mortise locks and exit devices because they can take up a lot of space on the door and if the stiles are not wide enough you may not be able to use that hardware.
