How do you program a key fob for a 2000 Toyota Camry?

Press the lock and unlock buttons on the remote simultaneously for 1 second. B. Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle once indicating successful programming.Click to see full answer. Similarly one may ask, how do you program a key fob for a 1999 Toyota Camry?To program the new Toyota Key fob hold the “Unlock” and “Lock” button on the key fob for two seconds and then release. Then press the “Lock” button for up to three seconds and release. The door should lock and unlock.Secondly, can you reprogram a Toyota key fob? Programming Instructions. Remove the key out of the ignition cylinder. Keep driver’s door open and unlocked, while leaving all other doors closed. Within 3 seconds, the power door locks should lock and then unlock automatically indicating that you have successfully entered the programming mode. Additionally, can I program any remote to my car? Hi there. You could reprogram a key fob to a different vehicle as long as the key is the same for the vehicle. In this case, if the key can go into the doors and unlock them, then you would need to do the following: Remove the battery cables from the vehicle, wait 30 seconds, then hook them back up (reset computer).How do you program a Toyota door lock? Changing the Mode Set the dome light control knob to the “door” position. Be sure the shift lever is in “Park” and close all doors. Insert the ignition key and turn it to the “On” position. Within five seconds after the key is turned “On,” push and hold the driver’s side power door lock switch for about five seconds.