How do you remove a Stihl FS 90 head?
Push the pin in as far as it will go to block the shaft. Twist the trimmer head clockwise to unscrew it from the shaft. When you turn the head, it will hit the stop places in the output shaft, allowing the trimmer head to twist off the gear head. Place the trimmer head aside.Click…
Push the pin in as far as it will go to block the shaft. Twist the trimmer head clockwise to unscrew it from the shaft. When you turn the head, it will hit the stop places in the output shaft, allowing the trimmer head to twist off the gear head. Place the trimmer head aside.Click to see full answer. In this regard, how do you take the head off of a Stihl weedeater? How to Replace the Head on a Stihl Weed Eater Turn the weed eater off and unplug it if necessary. Locate the small cylinder with a hole in it that extends up from the base of the head. Rotate the nut at the bottom of the mowing head counterclockwise to remove it. Pull up on the head to remove it. Put a new thrust plate onto the shaft, if needed. Also, how do you remove the head on a Stihl FS 56? Place the supplied pin or screwdriver into the hole on the left at the back of the gear head. This hole is the output shaft. Push the pin in as far as it will go to block the shaft. Twist the trimmer head clockwise to unscrew it from the shaft. Beside above, how do you remove the head of a trimmer? Pull the trimmer line spool out of the trimmer head. Observe your trimmer head to see if it has a small hole in the inner and outer portions. If so, insert a small Phillips screwdriver into the two holes to hold it in position, remove the center nut with an adjustable wrench and pull the head off.How does a bump feed grass trimmer work?The bump feed electric trimmer uses centrifugal force to pull the string from the spool. When you have a bump feed string trimmer, you manually advance the string by gently bumping it on the ground. This gives you control over how much line you use.
