How do you remove a wire harness from a clip?

How to Remove Wires From Connections on a Wiring Harness Insert the pin extractor in the open end of the plug, over the pin requiring extraction. Push the plunger down, depressing the barbs holding the pin in place. Grab the wire as close to the back of the pin as possible. While still holding the barbs in, pull out the wire gently, taking the pin with it. Click to see full answer. In this regard, how do you remove wiring harness clips?Separate electronic connectors that are secured with clips by pinching the lift lever on the plug to release the overhead clip, or by pressing the tip of a small slotted screwdriver onto a clip that fits inside a socket slot. Pull the connector plug away once the clip is released.Secondly, how do you remove a push wire from a light switch? To remove these wires, insert the blade of a small screwdriver into the slot under the hole into which the wire is inserted and push in as you pull the wire loose. Pushing the blade of the screwdriver into the slot releases the grip on the inserted wire. Also to know, how do I remove a wiring harness from my car stereo? How to Disconnect the Car Stereo Wiring Harness Remove the dash plate or console to reveal how the stereo is connected to the vehicle. Pull the stereo out of the dash far enough to reveal the wiring connected to the back of the stereo. Unplug the wiring harness from the back of the car stereo to remove it from this component. How do you connect two wires to a connector?To twist two wires together, you first need to strip the insulation off the wires. Next, hold the wires side by side and twist them together with your thumb and forefinger. The resulting connection should be fairly strong and hold together when a small tug is applied.