How do you replace a kitchen backsplash?

Remove the Old Tile and Sheetrock Prepare the wall for demolition. Remove the tile. Cut the drywall where it meets the countertop and the cabinets, using a utility knife. Continue to break out areas of the drywall with the hammer. Measure the areas that need drywall. Click to see full answer. Also asked, how do I replace my backsplash? Steps: Use hammer and flat bar to pry existing tiles—one at a time—from backsplash wall. Scrape the bare wall clean with a wide-blade scraper. Mix thin-set mortar and apply to wall with trowel, fill all holes and depressions. Rub the thin-set perfectly smooth using a wet sponge and flat trowel. One may also ask, how difficult is it to remove tile backsplash? Wiggle the knife in behind the tile, pulling upward very slowly and gently as you do so. The goal is to get the tile up in one piece with as much mortar as possible to create the least mess. Use a hammer sparingly and gently to tap the putty knife behind any tiles that are stuck fast. Thereof, how much does it cost to redo kitchen backsplash? Kitchen Backsplash Cost. The average cost for kitchen backsplash is roughly $400 to $600 per 16 square foot, excluding labor. You could pay about $300 to $400 per 16 square foot for cheaper ceramic variations, or between $650 and $1,000 per 16 square foot for high-quality types.How do you remove a backsplash without damaging drywall? Steps Clear off the countertops. Remove the covers from the outlets. Take down the microwave and remove the microwave brackets if it’s attached to the wall. Using the tape and plastic bag, cover the sink. Put on your glasses and gloves. Score the 1st tile you plan on starting with using the grout cutter.