How do you replace a lid switch on a washing machine?
Remove the lid switch/lock assembly Thread the lid switch/lock assembly wire harness through the hole in the back of the top panel where you released the white plastic clip. Release the tape on the lid and open the washer lid. Pull the lid switch/lock assembly out of the washer. Tape the lid shut again.Click to…
Remove the lid switch/lock assembly Thread the lid switch/lock assembly wire harness through the hole in the back of the top panel where you released the white plastic clip. Release the tape on the lid and open the washer lid. Pull the lid switch/lock assembly out of the washer. Tape the lid shut again.Click to see full answer. Subsequently, one may also ask, how much does it cost to replace a lid switch on a washer? (Direct Drive Washing Machines) Washing Machine Repair Procedure Average Washer Repair Time Average Repair Charge Washer lid switch repair 15-40 min. 189.85 Washer transmission repair 30-60 min. 388.33 Washer tripod suspension repair 45-120 min. 419.70 Washer outer tub repair 45-120 min. 307.05 Also, how do you test a washing machine lid switch? How to Test the Lid Switch on a GE Washing Machine Unplug the washer from the wall outlet. Insert a putty knife between the front cabinet and top of the washing machine, approximately 6 inches from each side to release the spring clips. Lift up the top and locate the lid switch on the underside of the top. Pull the two wires off of the two lid switch terminals. Besides, what is the function of a lid switch on a washing machine? The lid switch indicates to the washing machine when it is safe to proceed to the next cycle, particularly when that cycle is possibly hazardous, such as the agitate or spin cycle. If the switch is broken, the machine interprets that as the lid is open, and will not progress to the next cycle.Can I bypass the lid switch on my washer?This switch performs the same function, but the lid must be locked in place for the machine to wash. A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid. However, lid lock switches are generally magnetic and must be bypassed differently.
