How do you replace a widespread faucet?

shut-off valves Step 1: Turn off the water. Step 2: Remove the old faucet. Step 3: Seal the spout base. Step 4: Hand-tighten the basin nut. Step 5: Thread the tee on the spout. Step 6: Center the spout. Step 7: Place the faucet valves in the sink. Step 8: Connect the faucet valve lines to the faucet valve. Click to see full answer. Subsequently, one may also ask, what does a widespread faucet mean?A widespread faucet is generally for larger sinks because it allows for more room between the faucet handles and spout than a centerset faucet. The ‘Spread’ is the distance between the faucet mounting holes. Usually centersets are single or four inch spacing between holes, while a widespread is wider.One may also ask, how do you replace a bathroom faucet handle? Steps Turn off the water supply to the faucet. Test the faucet to ensure no water comes out when the handle to be replaced is turned. Examine the cap or top of the handle. Use a flat head screwdriver to loosen the cap and pry it up. Look at the area hidden beneath the cap for a screw. Similarly one may ask, how do you measure a widespread faucet? Measure the distance between the handles. Hold the the tape measure above the faucet if it’s in the way. If the distance is six inches or more you need a “widespread” or “eight inch spread” faucet.How do I remove a Moen widespread bathroom faucet?To remove the cartridge from your widespread faucet assembly, first hold the handle steady and unscrew the handle hubs counterclockwise. Once the handle hubs are loosened completely, pull the handles off the valve assembly. Then, using tool #14272 (which is not included), loosen and remove the cartridge nut.