How do you screw into concrete ceiling?

Place the tip of the bit against the center of the first mark on the ceiling. While holding the drill perpendicular to the ceiling surface press the trigger and begin to drill into the concrete, using the “hammer action” option on the drill. Drill only to the depth required for the screw anchors.Click to see full answer. Furthermore, is it safe to drill into concrete ceiling?Tapcons are not suitable for a ceiling mount. Use a proper AC (corded) hammer drill, the higher the wattage the better. Concrete is the worst thing to drill into and needs the proper tools. A good quality hammer drill bit is a must.Likewise, do I need to drill a pilot hole for concrete screws? Use a hammer drill In some less dense materials like soft brick, you can drill pilot holes using a carbide-tipped bit in a regular drill. But in most cases, you’ll need a hammer drill. Precisely sized carbide-tipped bits are often included with packs of screws, or you can purchase one separately. Beside this, how do you hang something on a concrete ceiling without drilling? If you’re installing a suspended ceiling, a hanging partition or track lights to a concrete ceiling, you can avoid drilling for wedge anchors and go with angle clips and pins. The clips have predrilled holes for bolts or hanger wires and attach to the concrete using a powder-actuated tool.Can I drill a hole in my ceiling?Use an electric drill to drill a pilot hole into the ceiling joist. Select a drill bit that is slightly smaller than the screw hook. If the hole is too wide, the thread of the screw won’t have anything to grab onto. If it is too shallow, you will have a hard time screwing the hook in all the way.