How do you use a come along cable puller?

How to use a cable puller Step 1 – Disengage main ratchet drive. First, locate the drive pawl spring on the lever handle and pull it to the ‘up’ position to disengage the main ratchet drive. Step 2 – Attach load hook. Step 3 – Release cable. Step 4 – Release stop pawl trigger. Step 5 – Attach anchor hook. Click to see full answer. In this manner, can you use a come along for lifting?Come-alongs are not rated for overhead lifting, but a similar looking device called a ratchet lever hoist is used this way. The original tool of this type was developed by Abraham Maasdam of Deep Creek, Colorado about 1919, and later commercialized by his son, Felber Maasdam, about 1946.Likewise, how do you use a come along to tighten a fence? Place the knobbed side of the T-post on the inside of the fence. Unroll the barbed wire along the line of the fence posts. Fasten the wire to one of the corner posts and pull it as tightly as possible to the next corner post. Use a wire stretcher, a mechanical ratchet device, to pull the wire tighter. Thereof, what is the difference between a chain hoist and a come along? Lever chain hoists or called come alongs are used for vertical and horizontal movements like pulling, dragging, stretching, and positioning loads up to 10,000 kg (See Pull Lift C85). Its capacity is generally lower than a hand hoist’s one. The design of a lever hoist is similar to that of a hand chain operated hoist.How much weight can a come along pull?The best part about this product is its working capacity. Its maximum lifting capacity is 4000 pounds, and the safe working capacity is 2000 pounds, which is still more than the maximum working capacity of many products.