How do you use a leveling transit?

How to Use a Builder’s Transit Level Extend each leg of the tripod until it set in a stable position. Attach the transit level to the tripod and adjust the tripod’s legs until the bubbles on the top of the transit reads close to level. Rotate the telescope until it is precisely parallel with two of the four thumbscrews. Click to see full answer. Also know, how accurate is a transit level?Transit levels are very precise. They are used to establish a reference line, but they are also used to provide readings of angles in precise measurements.One may also ask, how do you level a transit With 3 leveling screws? Turn the telescope 90 degrees until over the other set of leveling screws or when you have only three leveling screws then over the third screw and adjust. 5. Repeat the leveling procedure above alternating from one pair of leveling screws to the other until transit is level. Keeping this in view, what is the difference between a builders level and a transit? HERE IT IS: A builder’s level moves only horizontally, while a transit level moves both horizontally and vertically. Transit levels are preferred over the builder’s levels for establishing straight lines as well as turning angles. The transits level also has more parts than a builder’s level.What is the best transit level? Best Transit Levels For Surveying 2020 #1 – SitePro 25–TL20X Power Transit Level. #2 – NWI NSLP500B Siteline Transit Level Package. #3 – DEWALT DW092PK 20X Transit Level Package. #4 – CST/Berger 54-200B 20X Speed Line Transit Level Package.