How do you use cetol?
Apply a coat of Cetol as visually required. Before application of the maintenance coat, wash the surface with Interlux All-Purpose Boat Soap, as per instructions on label, then sand the surface lightly with 220-320 grit sandpaper. Be sure to remove all sanding dust with a vacuum. Once clean, apply the maintenance coat.Click to see full…
Apply a coat of Cetol as visually required. Before application of the maintenance coat, wash the surface with Interlux All-Purpose Boat Soap, as per instructions on label, then sand the surface lightly with 220-320 grit sandpaper. Be sure to remove all sanding dust with a vacuum. Once clean, apply the maintenance coat.Click to see full answer. Subsequently, one may also ask, how do you use sikkens cetol? Smooth the surface to be treated with sandpaper. Use it to remove any splinters, raised grain or dirt. Use your natural bristle brush to work on a warm day with humidity less than 80 percent. Apply a primary coat of Cetol 1. Clean your brush in mineral spirits. Allow the product to dry for a minimum of 24 hours. Tip. Similarly, can cetol be applied over varnish? Cetol Marine can be applied anywhere that you would use varnish, but is particularly suitable for areas that endure hard use—grabrails, swim platforms and ladders, or the cockpit sole, where it produces a surprisingly durable and non-slip finish. Unlike varnish there is no need to sand between coats. In this manner, how long does Sikkens stain take to dry? 24 hours How many coats of cetol are there? 3 coats
