How is the fan motor started in a typical oil furnace?
A typical oil furnace follows this operation sequence: The thermostat in the living space calls for heat. The electrodes and burner motor are energized, and air and oil start to flow through the burner. The fan pulls 70F air from the return duct, through the filter and pushes the air past the heat exchanger.Click to…
A typical oil furnace follows this operation sequence: The thermostat in the living space calls for heat. The electrodes and burner motor are energized, and air and oil start to flow through the burner. The fan pulls 70F air from the return duct, through the filter and pushes the air past the heat exchanger.Click to see full answer. Moreover, what is the typical voltage for an oil furnace?For a typical residential oil burner application, the breakdown voltage at the electrodes is between 8000 and 10,000 volts. Once breakdown occurs, the voltage across the gap assumes a lower value, which is the voltage required to maintain current through the gap. This is the holding voltage.Furthermore, what must be done to the liquid fuel oil before it is burned in a modern furnace? Heating oil in liquid form must be turned into vapor and mixed with air before it can burn. When the oil from the storage tank reaches the burner’s nozzle, it’s broken into small droplets. This process is called atomizing. Similarly, you may ask, is variable speed furnace worth the cost? The best news … a variable speed furnace motor is 80–85% more efficient than a standard furnace motor. If you don’t have a 90% efficiency or higher furnace in your home, then yes it may well be worth the cost to upgrade.What provides ignition for an oil burner?An oil burner is a heating device which burns #1, #2 and #6 heating oils, diesel fuel or other similar fuels. This spray is usually ignited by an electric spark with the air being forced through around it at the end of a blast tube, by a fan driven by the oil burner motor.
