How many pavers do I need for a round fire pit?

Pavers also work well, but since these are literally made to be used as a wall, they stack nicely. The fire pit is 36″ in diameter, so its circumference is about 113″. Each block is about 9″ long on the short end, so I needed 13 bricks for each “level”. I decided on two levels, so this is 26 blocks total.Click to see full answer. Also question is, can you use pavers for a fire pit?Landscaping brick that’s been kiln-fired is safe to use. Brick paver stones should also be safe to use. If you already have bricks on hand, you can complete this fire pit in a few hours. Choose a surface that’s level, solid, and has a non-combustible base.Beside above, what is the best base for a fire pit? Flagstone and crushed stone are ideal materials for the fire pit cap, and the stones in the center of the pit, respectively. Also asked, what do you put in the bottom of a fire pit? Some materials like hard rock, gravel, or sand weren’t meant to reach high temperatures and can spark and explode if your fire gets too hot. Instead, use lava rocks for your fire pit or lava glass beads as a filler for your fire pit. They are a safe way to create drainage and make your fire pit look nice.Should I put sand in my fire pit?Some metal fire pits recommend you to use an inch or 2 thick layer of sand at the bottom of the pit. Sand is also great for protecting the actual metal bowl from the intense heat the fire can put out. At the end of the day, there is no harm in putting sand in the base of a metal pit.