How much gravel do I need to fill an area?
How much gravel do I need? Determine the length and width of a cuboidal excavation. Calculate the area of the excavation, multiplying the length and width together. Determine the depth of the excavation. Multiply the area and depth of the excavation to obtain its volume: 18 * 2 = 36 yd³ . Click to see…
How much gravel do I need? Determine the length and width of a cuboidal excavation. Calculate the area of the excavation, multiplying the length and width together. Determine the depth of the excavation. Multiply the area and depth of the excavation to obtain its volume: 18 * 2 = 36 yd³ . Click to see full answer. Hereof, how much gravel do I need calculator?Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.Additionally, how much area does a ton of gravel cover? A ton of gravel can cover anywhere from 20 square feet to 240 square feet depending on depth. More rocks per square foot result in a lower coverage rate. At a depth of 1 inch, the coverage is up to 240 square feet, and 3 inches can reduce the coverage rate to 80 square feet. Regarding this, how much gravel do I need to fill a hole? Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.How deep should my gravel be?You would usually lay a 10mm aggregate at a depth of 30-40mm, but on a driveway this would need to be at least 50mm. A 20mm aggregate would need to be at least 40-50mm deep, and at least 50-60mm on driveways.
