How much salt do you put in a GE water softener?

The amount of salt to add to tank during new installation is dependent on the hardness of the water. The average tank holds 200 lbs. but need not be filled all the way, 3/4 full is ok.Click to see full answer. Keeping this in view, how much salt do you put in a water softener?We recommend keeping your brine tank at least one quarter full of water softener salt at all times, and no more than four to six inches below the top of the tank for optimum efficiency. Make sure that the salt level always remains a few inches above the water level.One may also ask, what kind of salt do you use in a GE water softener? Only clean, 99.5% pure water softening salts should be used in the water softener. We recommend using Nugget, Pellet, or coarse Solar salts. Potassium chloride (KCl) can also be used as an alternative to sodium chloride (salt – NaCl) in the softener. Similarly, it is asked, how do you put salt in a GE water softener? Water Softener – Checking Salt Storage Level / Adding Salt Simply take a broom handle and stand on floor on the outside of the tank. Mark the handle about 2 inches below top. Stick the handle down into the salt and work it down through the salt pellets as far as it will go. If the mark on the handle is 4 inches above the tank, a salt bridge exists. Why is my water softener using a lot of salt?Remember, your water softener is connected to the rest of your water system. If it’s using a lot of salt, it might mean you have a toilet that’s running constantly. This will deplete the salt very quickly and can be quite common if you have a bathroom that doesn’t get much use.