How should pilot burner be adjusted?
How to Adjust the Pilot Light Flame on a Gas Furnace Locate the access plate on the front of your furnace, and unscrew the screws that are connecting the access plate to your furnace. Observe the flame. Turn that screw counter-clockwise, and the flame should grow. Rotate the screw on the pilot light clockwise, and…
How to Adjust the Pilot Light Flame on a Gas Furnace Locate the access plate on the front of your furnace, and unscrew the screws that are connecting the access plate to your furnace. Observe the flame. Turn that screw counter-clockwise, and the flame should grow. Rotate the screw on the pilot light clockwise, and the size of the flame will decrease. Click to see full answer. In this regard, can a pilot light flame be adjusted? Adjusting the Pilot Flame If the pilot flame is too small, you may be able to make it larger by turning the pilot adjustment screw on the valve control counterclockwise with a screwdriver to open it. The cause of a weak flame may also be an obstruction in the pilot tube.Subsequently, question is, how do you adjust the flame on a gas boiler? All you will need to do is to twist the adjustment screw of the flame till the flame goes from one and half inches to two inches, which is about 4 to 5 centimeters high. Look for the adjustment screw on the pilot assembly close to the gas valve if the control valve has this adjustment feature. Simply so, where is the pilot light adjustment screw? The pilot adjustment screw is located on the gas valve, just “above” the pilot tube (See Figure 3). Remove the cap screw and find the actual adjustment screw behind it. Turn the screw in to decrease pilot flame, out to increase.Is my pilot light too high?A: There is a way to control the height of the pilot light flame. The pilot flame should touch the thermocouple at a specific level. If the flame is blue and weak, and barely reaches the thermocouple, it needs to be stronger. If it extends well above the thermocouple, it’s too strong.
