What are the specifications for a handicap ramp?

ADA Ramp Specifications Ramps may have a maximum slope of 1:12. Ramps must be a minimum of 36 inches wide. All edges must be protected to keep anyone from slipping off. All ramps shall have top and bottom landings as wide as the ramp itself and at least 60 inches long. Landing size must be at least five feet square. Click to see full answer. Consequently, how wide should a handicap ramp be? Wheelchair Ramp Width The minimum width and clearance should be at least 36 inches in most states. If a rail is present the width of the rails needs to be no less than 42 inches to accommodate for the spacing of the rail and 1.5 inch spacing between the handrail and the edge of the ramp.Secondly, how can I get a free wheelchair ramp? You can receive an application through your local AAAs office. If you cannot get approved through Medicaid, then you should consider free programs. The Habitat for Humanity provides a free handicapped ramp program for disabled, low-income and fixed income seniors. Similarly one may ask, what is the maximum allowable slope for a ramp? The least possible slope should be used whenever possible. The maximum allowable slope in any new construction is 1:12 with a maximum rise of 30” | 76.2 cm without a landing. A ramp with a slope between 1:12 and 1:16 can have a maximum horizontal length of 30′ | 9.14 m without a landing.Does Medicare cover handicap ramps?Medicare. Original Medicare’s policy on wheelchair ramps falls under their policy for Durable Medical Equipment. As such, if the wheelchair ramp is used for a medical purpose, then the ramp is reimbursable. A ramp will have to be medically necessary as declared by a licensed physician.