What does a coil do in a small engine?

Whether you start the engine with a pull rope or the turn of a key on an electric start motor, you’re relying on the ignition system to produce a spark inside the combustion chamber. When you start your lawn mower or small engine, you turn the flywheel and its magnets pass the coil (or armature).Click to see full answer. Herein, why do small engine ignition coils fail?The leading cause of premature failure of an ignition coil is due to a worn or bad spark plug ignition cable. A bad spark plug ignition cable will have a much higher than normal resistance. This high resistance causes a very high amount of voltage to be generated from your ignition coil’s secondary winding.Additionally, how do you check a coil? The only safe way to test for spark is to use a spark plug tester tool. If a coil problem is suspected, measure the coil’s primary and secondary resistance with an ohmmeter. If either is out of specifications, the coil needs to be replaced. A coil can be easily bench tested with a digital 10 megaohm impedance ohmmeter. Regarding this, how do I fix no spark? If you do not see a spark, there is an ignition problem. Remove a plug wire and insert an old spark plug or a spark plug tester into the end of the wire (the plug boot). Place the spark plug on a metal surface on the engine, or ground the spark plug tester to the engine. Then crank the engine to check for a spark.What causes no spark to the spark plug?Loss of spark is caused by anything that prevents coil voltage from jumping the electrode gap at the end of the spark plug. This includes worn, fouled or damaged spark plugs, bad plug wires or a cracked distributor cap.