What does it mean when a dryer won’t start?
If your dryer won’t start, the most likely causes are a lack of power, a defective door switch, a blown thermal fuse or a bad start switch. Open the dryer door and check if the light inside the dryer turns on. If it doesn’t turn on, check your power cord and the house circuit breaker.Click…
If your dryer won’t start, the most likely causes are a lack of power, a defective door switch, a blown thermal fuse or a bad start switch. Open the dryer door and check if the light inside the dryer turns on. If it doesn’t turn on, check your power cord and the house circuit breaker.Click to see full answer. In respect to this, how do you troubleshoot a dryer? Problem: Dryer Won’t Start The door latch may not be engaging. Check the latch for lint and clean it completely so that the door closes properly. Check the power supply, including fuses and circuit breakers. Check the dryer’s internal thermal fuse. If you have a push start knob, it may not be engaging correctly. Also, when I press the start button on my dryer nothing happens? Dryer: Won’t start. You push the start button-and nothing happens. A broken power cord, failed push-to-start switch or a bad timer can also prevent the dryer from starting. Some dryers use a motor relay to control the drive motor so a broken motor relay can prevent the dryer from starting. Beside above, where is the dryer reset button? Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.How do I know if my thermal fuse is blown?Touch the left multimeter lead to the left side of the thermal fuse; touch the right multimeter lead to the right side of the fuse. Keep an eye on the multimeter needle; a needle that fails to move indicates a blown thermal fuse. If this is the case, don’t fret: thermal fuse replacement is a simple task.
