What happens if your TPS is bad?

When a TPS goes bad, then the car’s throttle body won’t function properly. It could either stay shut or it won’t close properly which is a severe issue. When the throttle gets stuck in an open position than your vehicle will receive too much air and cause it to have a high or fluctuating idle.Click to see full answer. In this manner, what are the symptoms of a bad TPS sensor? Here are some common symptoms of a bad or failing throttle position sensor to watch for: Car won’t accelerate, lacks power when accelerating, or accelerates itself. Engine won’t idle smoothly, idles too slowly, or stalls. Car accelerates, but won’t exceed a relatively low speed, or shift up. Also, can you repair a throttle position sensor? Repair, Reprogram, or Replace Your Sensor Once you’ve gone through the symptoms of a bad throttle position sensor, it’s time to find a solution. Completely replacing your sensor may be the best way to avoid future issues, but some issues can be easily fixed by reprogramming or repairing your sensor. Consequently, can a bad throttle position sensor affect transmission? The Throttle Position sensor measures the throttle position, which is controlled by the gas pedal. It is used to determine engine load and if it fails it can cause automatic transmission shifting problems.How do you reset throttle position sensor?Turn the ignition switch on and wait 3 seconds. Immediately after the 3 seconds, the accelerator pedal must be pressed and released 5 times within 5 seconds. Wait 7 seconds and fully press the accelerator pedal and hold for approximately 20 seconds until the check engine light stops blinking and stays on.